wiki:TipAndDoc/service/sakura/ipv6

Version 6 (modified by mitty, 14 years ago) (diff)

--

  1. using Sakura 6rd
  2. 6rd on Ubuntu 10.04 lucid
    1. re-enable IPv6
    2. backport maverick kernel
    3. backport maverick iproute
    4. apply settings
    5. check IPv6 access

using Sakura 6rd

  • ​さくらの6rd（トライアル） « さくらインターネット研究所
    • ​6rd設定方法（Ubuntu10.10編） « さくらインターネット研究所
      1. IPv6アドレスの算出 
        # printf "2001:e41:%02x%02x:%02x%02x::1\n" 59 106 69 124
2001:e41:3b6a:457c::1
      2. /etc/network/interfaces ファイルの編集 
        # vi /etc/network/interfaces   (以下を追加)
auto tun6rd
iface tun6rd inet6 v4tunnel
        address 2001:e41:3b6a:457c::1
        netmask 32
        local 59.106.69.124
        endpoint any
        gateway ::61.211.224.125
        ttl 64
        up ip tunnel 6rd dev tun6rd 6rd-prefix 2001:e41::/32
        up ip link set mtu 1280 dev tun6rd
      3. 設定反映を確認 
        # ifconfig tun6rd
tun6rd    Link encap:IPv6-in-IPv4
          inet6アドレス: ::59.106.69.124/128 範囲:Compat
          inet6アドレス: 2001:e41:3b6a:457c::1/32 範囲:グローバル
          UP RUNNING NOARP  MTU:1280  メトリック:1
          RXパケット:0 エラー:0 損失:0 オーバラン:0 フレーム:0
          TXパケット:0 エラー:0 損失:0 オーバラン:0 キャリア:0
          衝突(Collisions):0 TXキュー長:0
          RXバイト:0 (0.0 B)  TXバイト:0 (0.0 B)

# ip tunnel show
sit0: ipv6/ip  remote any  local any  ttl 64  nopmtudisc 6rd-prefix 2002::/16
tun6rd: ipv6/ip  remote any  local 59.106.69.124  ttl 64  6rd-prefix 2001:e41::/32

# ip -6 route show | grep default
default via ::61.211.224.125 dev tun6rd  metric 1024  mtu 1280 advmss 1220 hoplimit 0

6rd on Ubuntu 10.04 lucid

re-enable IPv6

  • $ sudo vim /etc/sysctl.conf 
    Index: /etc/ufw/sysctl.conf
===================================================================
--- /etc/ufw/sysctl.conf        (revision 530)
+++ /etc/ufw/sysctl.conf        (revision 531)
@@ -30,8 +30,3 @@

 #net/ipv4/tcp_fin_timeout=30
 #net/ipv4/tcp_keepalive_intvl=1800
-
-#disable ipv6
-net.ipv6.conf.all.disable_ipv6 = 1
-net.ipv6.conf.default.disable_ipv6 = 1
-net.ipv6.conf.lo.disable_ipv6 = 1
  • $ sudo vim /etc/ufw/sysctl.conf 
    Index: /etc/sysctl.conf
===================================================================
--- /etc/sysctl.conf    (revision 530)
+++ /etc/sysctl.conf    (revision 531)
@@ -32,11 +32,6 @@
 #net.ipv6.conf.all.forwarding=1


-#disable ipv6
-net.ipv6.conf.all.disable_ipv6 = 1
-net.ipv6.conf.default.disable_ipv6 = 1
-net.ipv6.conf.lo.disable_ipv6 = 1
-
 ###################################################################
 # Additional settings - these settings can improve the network
 # security of the host and prevent against some network attacks

backport maverick kernel

  • $ sudo aptitude install linux-headers-generic-lts-backport-maverick linux-image-generic-lts-backport-maverick 
      linux-headers-2.6.35-23{a} linux-headers-2.6.35-23-generic{a}
  linux-headers-generic-lts-backport-maverick linux-image-2.6.35-23-generic
  linux-image-generic-lts-backport-maverick

backport maverick iproute

  • $ sudo aptitude install -R python-software-properties 
      python-software-properties unattended-upgrades{a}
  • $ sudo add-apt-repository ppa:nathan-launchpad/iproute-lucid-ppa 
    Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv 0ABF9419A50E06EF0E31A901F798C386A6A6010B
gpg: requesting key A6A6010B from hkp server keyserver.ubuntu.com
gpg: key A6A6010B: public key "Launchpad iproute-ppa" imported
gpg: Total number processed: 1
gpg:               imported: 1  (RSA: 1)
  • $ sudo aptitude update
  • $ sudo aptitude install iproute 
      iproute

apply settings

  • printf "2001:e41:%02x%02x:%02x%02x::1\n" 59 106 180 123 
    2001:e41:3b6a:b47b::1
  • $ sudo vim /etc/default/ufw 
    Index: /etc/default/ufw
===================================================================
--- /etc/default/ufw    (revision 532)
+++ /etc/default/ufw    (revision 533)
@@ -4,7 +4,7 @@
 # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback
 # accepted). You will need to 'disable' and then 'enable' the firewall for
 # the changes to take affect.
-IPV6=no
+IPV6=yes

 # Set the default input policy to ACCEPT, ACCEPT_NO_TRACK, DROP, or REJECT.
 # ACCEPT enables connection tracking for NEW inbound packets on the INPUT
Index: /etc/network/interfaces
  • $ sudo vim /etc/network/interfaces 
    ===================================================================
--- /etc/network/interfaces     (revision 532)
+++ /etc/network/interfaces     (revision 533)
@@ -16,3 +16,14 @@
	 # dns-* options are implemented by the resolvconf package, if installed
	 dns-nameservers 210.188.224.10
	 dns-search sakura.ne.jp
+
+auto tun6rd
+iface tun6rd inet6 v4tunnel
+	address 2001:e41:3b6a:b47b::1
+	netmask 32
+	local 59.106.180.123
+	endpoint any
+	gateway ::61.211.224.125
+	ttl 64
+	up ip tunnel 6rd dev tun6rd 6rd-prefix 2001:e41::/32
+	up ip link set mtu 1280 dev tun6rd

check IPv6 access