[[PageOutline]] = iproute2 = * see wiki:TipAndDoc/network/iproute * [../#networkmap] のネットワークを使用 = centos-inner = * パケットの往路と復路が異なってしまう問題への対応 * see [../route#imperfect] == 設定前 == * centos-inner ~]$ route {{{ Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.50.0 * 255.255.255.0 U 0 0 0 eth0 10.2.0.0 * 255.255.0.0 U 0 0 0 eth2 10.0.0.0 10.1.0.254 255.255.0.0 UG 0 0 0 eth1 10.1.0.0 * 255.255.0.0 U 0 0 0 eth1 169.254.0.0 * 255.255.0.0 U 0 0 0 eth2 default 192.168.50.1 0.0.0.0 UG 0 0 0 eth0 }}} * 10.0.0.0/16のルートについては設定済み * centos-inner ~]$ ip route {{{ 192.168.50.0/24 dev eth0 proto kernel scope link src 192.168.50.110 10.2.0.0/16 dev eth2 proto kernel scope link src 10.2.0.110 10.0.0.0/16 via 10.1.0.254 dev eth1 10.1.0.0/16 dev eth1 proto kernel scope link src 10.1.0.110 169.254.0.0/16 dev eth2 scope link default via 192.168.50.1 dev eth0 }}} * centos-inner ~]$ ip route show dev eth0 {{{ 192.168.50.0/24 proto kernel scope link src 192.168.50.110 default via 192.168.50.1 }}} * centos-inner ~]$ ip route show dev eth1 {{{ 10.0.0.0/16 via 10.1.0.254 10.1.0.0/16 proto kernel scope link src 10.1.0.110 }}} * centos-inner ~]$ ip route show dev eth2 {{{ 10.2.0.0/16 proto kernel scope link src 10.2.0.110 169.254.0.0/16 scope link }}} * centos-inner ~]$ ip rule {{{ 0: from all lookup 255 32766: from all lookup main 32767: from all lookup default }}} * centos-outer <=(router)=> centos-inner * centos-outer ~]$ ping 10.2.0.110 -c 1 1. centos-outer:eth1 1. ubuntu-router:eth0 1. ubuntu-router:eth2 {{{ 17:18:03.739868 IP 10.0.0.20 > 10.2.0.110: ICMP echo request, id 31500, seq 1, length 64 }}} 1. centos-inner:eth2 {{{ 17:18:03.794897 IP 10.0.0.20 > 10.2.0.110: ICMP echo request, id 31500, seq 1, length 64 }}} 1. centos-inner:eth1 {{{ 17:18:03.795150 IP 10.2.0.110 > 10.0.0.20: ICMP echo reply, id 31500, seq 1, length 64 }}} 1. ubuntu-router:eth1 {{{ 17:18:03.741063 IP 10.2.0.110 > 10.0.0.20: ICMP echo reply, id 31500, seq 1, length 64 }}} 1. ubuntu-router:eth0 1. centos-outer:eth1 == 設定 == * routing table 設定 1. centos-inner ~]$ sudo ip route add default via 10.1.0.254 table 1 1. centos-inner ~]$ sudo ip route add default via 10.2.0.254 table 2 * routing policy 設定 1. centos-inner ~]$ sudo ip rule add from 10.1.0.110 table 1 prio 1 1. centos-inner ~]$ sudo ip rule add from 10.2.0.110 table 2 prio 2 * routing policy に関しては、centos-innerはeth1とeth2でネットワークが分かれているので以下のような設定でも良い 1. centos-inner ~]$ sudo ip rule add from 10.1.0.0/16 table 1 prio 1 1. centos-inner ~]$ sudo ip rule add from 10.2.0.0/16 table 2 prio 2 * centos-inner ~]$ ip rule {{{ 0: from all lookup 255 1: from 10.1.0.0/16 lookup 1 2: from 10.2.0.0/16 lookup 2 32766: from all lookup main 32767: from all lookup default }}} === 反映 === * ip route list table main {{{ 192.168.50.0/24 dev eth0 proto kernel scope link src 192.168.50.110 10.2.0.0/16 dev eth2 proto kernel scope link src 10.2.0.110 10.0.0.0/16 via 10.1.0.254 dev eth1 10.1.0.0/16 dev eth1 proto kernel scope link src 10.1.0.110 169.254.0.0/16 dev eth2 scope link default via 192.168.50.1 dev eth0 }}} * main(default)のtableには変化無し * ip route list table 1 {{{ default via 10.1.0.254 dev eth1 }}} * ip route list table 2 {{{ default via 10.2.0.254 dev eth2 }}} * ip rule {{{ 0: from all lookup 255 1: from 10.1.0.110 lookup 1 2: from 10.2.0.110 lookup 2 32766: from all lookup main 32767: from all lookup default }}} == 結果 == * eth1(10.1.0.110)に入ってきたパケットはeth1から、eth2(10.2.0.110)に入ってきたパケットはeth2から送出されるようになる。 * centos-outer ~]$ ping 10.2.0.110 -c 1 1. centos-outer:eth1 1. ubuntu-router:eth0 1. ubuntu-router:eth2 {{{ 17:09:25.667375 IP 10.0.0.20 > 10.2.0.110: ICMP echo request, id 22028, seq 1, length 64 17:09:25.668310 IP 10.2.0.110 > 10.0.0.20: ICMP echo reply, id 22028, seq 1, length 64 }}} 1. centos-inner:eth2 {{{ 17:09:25.682422 IP 10.0.0.20 > 10.2.0.110: ICMP echo request, id 22028, seq 1, length 64 17:09:25.682547 IP 10.2.0.110 > 10.0.0.20: ICMP echo reply, id 22028, seq 1, length 64 }}} * centos-outer ~]$ ping 10.1.0.110 -c 1 1. centos-outer:eth1 1. ubuntu-router:eth0 1. ubuntu-router:eth1 {{{ 17:12:29.065247 IP 10.0.0.20 > 10.1.0.110: ICMP echo request, id 25356, seq 1, length 64 17:12:29.075733 IP 10.1.0.110 > 10.0.0.20: ICMP echo reply, id 25356, seq 1, length 64 }}} 1. centos-inner:eth1 {{{ 17:12:29.111101 IP 10.0.0.20 > 10.1.0.110: ICMP echo request, id 25356, seq 1, length 64 17:12:29.116137 IP 10.1.0.110 > 10.0.0.20: ICMP echo reply, id 25356, seq 1, length 64 }}} = 補足 = * ルールを削除する場合は、table あるいは priority を指定して削除する {{{ 0: from all lookup 255 1: from 10.1.0.110 lookup 1 2: from 10.2.0.110 lookup 2 32766: from all lookup main 32767: from all lookup default }}} * sudo ip rule del table 1 * sudo ip rule del prio 1 * priority は現在のところ省略可能 * sudo ip rule add from 10.1.0.110 table 1 * ip rule {{{ 0: from all lookup 255 32765: from 10.1.0.110 lookup 1 32766: from all lookup main 32767: from all lookup default }}} * attachment:ip-cref.pdf:wiki:TipAndDoc/network/iproute p.38 Really, for historical reasons '''ip rule add''' does not require a priority value and allows them to be non-unique. If the user does not supplied a priority, it is selected by the kernel. If the user creates a rule with a priority value that already exists, the kernel does not reject the request. It adds the new rule before all old rules of the same priority. It is mistake in design, no more. And it will be fixed one day, so do not rely on this feature. Use explicit priorities. * prio(priorityの省略形)の代わりに、preferも使える模様 * sudo ip rule add from 10.1.0.110 table 1 prefer 1 * ip rule {{{ 0: from all lookup 255 1: from 10.1.0.110 lookup 1 32766: from all lookup main 32767: from all lookup default }}} * routing table はキャッシュされるので、すぐに反映されない場合がある * cacheの確認 => ip route show cache * cacheの破棄 => sudo ip route flush cache * attachment:ip-cref.pdf:wiki:TipAndDoc/network/iproute p.38 Warning: Changes to the RPDB made with these commands do not become active immediately. It is assumed that after a script finishes a batch of updates, it flushes the routing cache with '''ip route flush cache'''. = ubuntu-inner-AB = * see [../ping#ubuntu-outerrouterubuntu-inner-AB] * routing table 設定 1. sudo ip route add default via 10.1.0.254 table 1 1. sudo ip route add default via 10.2.0.254 table 2 * routing policy 設定 1. sudo ip rule add from 10.1.0.0/16 table 1 prio 1 1. sudo ip rule add from 10.2.0.0/16 table 2 prio 2 * 上記[#centos-inner]と同様に、NICのIP or networkのどちらでも良い = ubuntu-inner-AA = * see [../ping#unexpected] * routing table 設定 1. sudo ip route add default via 10.1.0.254 dev eth0 table 10 1. sudo ip route add default via 10.1.0.254 dev eth1 table 20 * routing policy 設定 1. sudo ip rule add from 10.1.0.10 table 10 prio 1 1. sudo ip rule add from 10.1.0.20 table 20 prio 2 * ~~requestに関しては、eth1(10.1.0.20)ではなくeth0(10.1.0.10)側に届いてしまう~~ * ~~VMなのが問題なのか、route設定がおかしいのか謎~~ * ubuntu-outer:~$ ping 10.1.0.20 -c 1 {{{ PING 10.1.0.20 (10.1.0.20) 56(84) bytes of data. 64 bytes from 10.1.0.20: icmp_seq=1 ttl=63 time=18.0 ms --- 10.1.0.20 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 18.019/18.019/18.019/0.000 ms }}} 1. ubuntu-outer:eth1 {{{ 03:21:26.529593 IP 10.0.0.10 > 10.1.0.20: ICMP echo request, id 28200, seq 1, length 64 03:21:26.547598 IP 10.1.0.20 > 10.0.0.10: ICMP echo reply, id 28200, seq 1, length 64 }}} 1. ubuntu-router:eth0 {{{ 03:21:26.528120 IP 10.0.0.10 > 10.1.0.20: ICMP echo request, id 28200, seq 1, length 64 03:21:26.535301 IP 10.1.0.20 > 10.0.0.10: ICMP echo reply, id 28200, seq 1, length 64 }}} 1. ubuntu-router:eth1 {{{ 03:21:26.529233 IP 10.0.0.10 > 10.1.0.20: ICMP echo request, id 28200, seq 1, length 64 03:21:26.534766 IP 10.1.0.20 > 10.0.0.10: ICMP echo reply, id 28200, seq 1, length 64 03:21:26.535841 IP 10.1.0.254 > 10.1.0.10: ICMP redirect 10.1.0.110 to host 10.1.0.110, length 188 }}} 1. ubuntu-inner-AA:eth0 {{{ 03:21:26.516873 IP 10.0.0.10 > 10.1.0.20: ICMP echo request, id 28200, seq 1, length 64 03:21:26.523308 IP 10.1.0.254 > 10.1.0.10: ICMP redirect 10.1.0.110 to host 10.1.0.110, length 188 }}} 1. ubuntu-inner-AA:eth1 {{{ 03:21:26.520911 IP 10.1.0.20 > 10.0.0.10: ICMP echo reply, id 28200, seq 1, length 64 }}} * 数分放置したところrequestもeth1に届くようになった => cacheのせい？ * ubuntu-outer:~$ ping 10.1.0.20 -c 1 1. ubuntu-inner-AA:eth1 {{{ 03:31:16.124510 IP 10.0.0.10 > 10.1.0.20: ICMP echo request, id 49704, seq 1, length 64 03:31:16.125227 IP 10.1.0.20 > 10.0.0.10: ICMP echo reply, id 49704, seq 1, length 64 }}} * ubuntu-inner-AA上のrouting policyを削除したところ、前とは逆にeth1にrequest、eth0からreplyという状態になった。 * ubuntu-inner-AA:~$ sudo ip rule del prefer 1 * ubuntu-inner-AA:~$ sudo ip rule del prefer 2 * ubuntu-outer:~$ ping 10.1.0.20 -c 1 1. ubuntu-inner-AA:eth1 {{{ 03:35:13.581262 IP 10.0.0.10 > 10.1.0.20: ICMP echo request, id 58152, seq 1, length 64 }}} 1. ubuntu-inner-AA:eth0 {{{ 03:35:13.581520 IP 10.1.0.20 > 10.0.0.10: ICMP echo reply, id 58152, seq 1, length 64 }}} * ~~いよいよもって謎。~~ * これも数分放置したところ、eth0のみを通る状態に戻ったので、やはりcacheのせいと思われる * ubuntu-outer:~$ ping 10.1.0.20 -c 1 1. ubuntu-inner-AA:eth0 {{{ 03:46:28.309953 IP 10.0.0.10 > 10.1.0.20: ICMP echo request, id 16425, seq 1, length 64 03:46:28.310817 IP 10.1.0.20 > 10.0.0.10: ICMP echo reply, id 16425, seq 1, length 64 }}}