* sudo vmware-config.pl {{{ Making sure services for VMware Server are stopped. Stopping VMware autostart virtual machines: Virtual machines failed Stopping VMware management services: VMware Virtual Infrastructure Web Access VMware Server Host Agent failed Stopping VMware services: VMware Authentication Daemon done VM communication interface socket family: done Virtual machine communication interface done Virtual machine monitor done Bridged networking on /dev/vmnet0 done Host network detection done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet1 done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done Host-only networking on /dev/vmnet8 done Virtual ethernet done You must read and accept the End User License Agreement to continue. Press enter to display it. (snip) Do you accept? (yes/no) yes Thank you. None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] Using compiler "/usr/bin/gcc". Use environment variable CC to override. What is the location of the directory of C header files that match your running kernel? [/lib/modules/2.6.32-22-server/build/include] Extracting the sources of the vmmon module. Building the vmmon module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmware-config0/vmmon-only' make -C /lib/modules/2.6.32-22-server/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/linux-headers-2.6.32-22-server' CC [M] /tmp/vmware-config0/vmmon-only/linux/driver.o In file included from /tmp/vmware-config0/vmmon-only/./common/vmx86.h:32, from /tmp/vmware-config0/vmmon-only/linux/driver.h:29, from /tmp/vmware-config0/vmmon-only/linux/driver.c:101: /tmp/vmware-config0/vmmon-only/./include/x86msr.h:164:1: warning: "MSR_THERM2_CTL" redefined In file included from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr.h:4, from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/processor.h:21, from include/linux/prefetch.h:14, from include/linux/list.h:6, from include/linux/module.h:9, from /tmp/vmware-config0/vmmon-only/./include/compat_module.h:27, from /tmp/vmware-config0/vmmon-only/linux/driver.c:26: /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr-index.h:227:1: warning: this is the location of the previous definition In file included from /tmp/vmware-config0/vmmon-only/./common/vmx86.h:32, from /tmp/vmware-config0/vmmon-only/linux/driver.h:29, from /tmp/vmware-config0/vmmon-only/linux/driver.c:101: /tmp/vmware-config0/vmmon-only/./include/x86msr.h:164:1: warning: "MSR_THERM2_CTL" redefined In file included from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr.h:4, from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/processor.h:21, from include/linux/prefetch.h:14, from include/linux/list.h:6, from include/linux/module.h:9, from /tmp/vmware-config0/vmmon-only/./include/compat_module.h:27, from /tmp/vmware-config0/vmmon-only/linux/driver.c:26: /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr-index.h:227:1: warning: this is the location of the previous definition CC [M] /tmp/vmware-config0/vmmon-only/linux/driverLog.o CC [M] /tmp/vmware-config0/vmmon-only/linux/hostif.o In file included from /tmp/vmware-config0/vmmon-only/./common/vmx86.h:32, from /tmp/vmware-config0/vmmon-only/./common/hostif.h:32, from /tmp/vmware-config0/vmmon-only/linux/hostif.c:73: /tmp/vmware-config0/vmmon-only/./include/x86msr.h:164:1: warning: "MSR_THERM2_CTL" redefined In file included from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr.h:4, from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/processor.h:21, from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/thread_info.h:22, from include/linux/thread_info.h:56, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/mmzone.h:7, from include/linux/gfp.h:4, from include/linux/mm.h:8, from /tmp/vmware-config0/vmmon-only/./include/compat_page.h:23, from /tmp/vmware-config0/vmmon-only/linux/hostif.c:32: /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr-index.h:227:1: warning: this is the location of the previous definition CC [M] /tmp/vmware-config0/vmmon-only/common/comport.o CC [M] /tmp/vmware-config0/vmmon-only/common/cpuid.o CC [M] /tmp/vmware-config0/vmmon-only/common/hashFunc.o CC [M] /tmp/vmware-config0/vmmon-only/common/memtrack.o CC [M] /tmp/vmware-config0/vmmon-only/common/phystrack.o CC [M] /tmp/vmware-config0/vmmon-only/common/task.o CC [M] /tmp/vmware-config0/vmmon-only/common/vmx86.o In file included from /tmp/vmware-config0/vmmon-only/common/vmx86.h:32, from /tmp/vmware-config0/vmmon-only/common/vmx86.c:40: /tmp/vmware-config0/vmmon-only/./include/x86msr.h:164:1: warning: "MSR_THERM2_CTL" redefined In file included from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr.h:4, from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/processor.h:21, from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/thread_info.h:22, from include/linux/thread_info.h:56, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:56, from /tmp/vmware-config0/vmmon-only/common/vmx86.c:32: /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr-index.h:227:1: warning: this is the location of the previous definition CC [M] /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.o In file included from /tmp/vmware-config0/vmmon-only/./common/vmx86.h:32, from /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.c:35: /tmp/vmware-config0/vmmon-only/./include/x86msr.h:164:1: warning: "MSR_THERM2_CTL" redefined In file included from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr.h:4, from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/processor.h:21, from /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/thread_info.h:22, from include/linux/thread_info.h:56, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:56, from /tmp/vmware-config0/vmmon-only/./include/compat_sched.h:23, from /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.c:31: /usr/src/linux-headers-2.6.32-22-server/arch/x86/include/asm/msr-index.h:227:1: warning: this is the location of the previous definition LD [M] /tmp/vmware-config0/vmmon-only/vmmon.o Building modules, stage 2. MODPOST 1 modules CC /tmp/vmware-config0/vmmon-only/vmmon.mod.o LD [M] /tmp/vmware-config0/vmmon-only/vmmon.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-22-server' cp -f vmmon.ko ./../vmmon.o make: Leaving directory `/tmp/vmware-config0/vmmon-only' The vmmon module loads perfectly into the running kernel. None of the pre-built vmci modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmci module for your system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmci module. Building the vmci module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmware-config0/vmci-only' make -C /lib/modules/2.6.32-22-server/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/linux-headers-2.6.32-22-server' CC [M] /tmp/vmware-config0/vmci-only/linux/driver.o CC [M] /tmp/vmware-config0/vmci-only/linux/driverLog.o CC [M] /tmp/vmware-config0/vmci-only/linux/vmciKernelIf.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciContext.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciDatagram.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciDriver.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciDs.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciEvent.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciGroup.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciHashtable.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciProcess.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciQueuePair.o CC [M] /tmp/vmware-config0/vmci-only/common/vmciResource.o LD [M] /tmp/vmware-config0/vmci-only/vmci.o Building modules, stage 2. MODPOST 1 modules CC /tmp/vmware-config0/vmci-only/vmci.mod.o LD [M] /tmp/vmware-config0/vmci-only/vmci.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-22-server' cp -f vmci.ko ./../vmci.o make: Leaving directory `/tmp/vmware-config0/vmci-only' The vmci module loads perfectly into the running kernel. VMWare config patch VMCI! `/tmp/vmware-config0/vmci-only/Module.symvers' -> `/tmp/vmware-config0/../Module.symvers' None of the pre-built vsock modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vsock module for your system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vsock module. VMWare config patch VSOCK! `/tmp/vmware-config0/../Module.symvers' -> `/tmp/vmware-config0/vsock-only/Module.symvers' Building the vsock module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmware-config0/vsock-only' make -C /lib/modules/2.6.32-22-server/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/linux-headers-2.6.32-22-server' CC [M] /tmp/vmware-config0/vsock-only/linux/af_vsock.o CC [M] /tmp/vmware-config0/vsock-only/linux/driverLog.o CC [M] /tmp/vmware-config0/vsock-only/linux/util.o CC [M] /tmp/vmware-config0/vsock-only/linux/vsockAddr.o LD [M] /tmp/vmware-config0/vsock-only/vsock.o Building modules, stage 2. MODPOST 1 modules CC /tmp/vmware-config0/vsock-only/vsock.mod.o LD [M] /tmp/vmware-config0/vsock-only/vsock.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-22-server' cp -f vsock.ko ./../vsock.o make: Leaving directory `/tmp/vmware-config0/vsock-only' The vsock module loads perfectly into the running kernel. This program previously created the file /dev/vmnet0, and was about to remove it. Somebody else apparently did it already. This program previously created the file /dev/vmnet1, and was about to remove it. Somebody else apparently did it already. This program previously created the file /dev/vmnet8, and was about to remove it. Somebody else apparently did it already. You have already setup networking. Would you like to skip networking setup and keep your old settings as they are? (yes/no) [yes] None of the pre-built vmnet modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmnet module for your system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmnet module. Building the vmnet module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmware-config0/vmnet-only' make -C /lib/modules/2.6.32-22-server/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/linux-headers-2.6.32-22-server' CC [M] /tmp/vmware-config0/vmnet-only/driver.o CC [M] /tmp/vmware-config0/vmnet-only/hub.o CC [M] /tmp/vmware-config0/vmnet-only/userif.o CC [M] /tmp/vmware-config0/vmnet-only/netif.o CC [M] /tmp/vmware-config0/vmnet-only/bridge.o CC [M] /tmp/vmware-config0/vmnet-only/filter.o CC [M] /tmp/vmware-config0/vmnet-only/procfs.o CC [M] /tmp/vmware-config0/vmnet-only/smac_compat.o CC [M] /tmp/vmware-config0/vmnet-only/smac.o CC [M] /tmp/vmware-config0/vmnet-only/vnetEvent.o CC [M] /tmp/vmware-config0/vmnet-only/vnetUserListener.o LD [M] /tmp/vmware-config0/vmnet-only/vmnet.o Building modules, stage 2. MODPOST 1 modules CC /tmp/vmware-config0/vmnet-only/vmnet.mod.o LD [M] /tmp/vmware-config0/vmnet-only/vmnet.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-22-server' cp -f vmnet.ko ./../vmnet.o make: Leaving directory `/tmp/vmware-config0/vmnet-only' The vmnet module loads perfectly into the running kernel. Please specify a port for remote connections to use [902] Using Existing SSL Certificate. You have a pre-existing config.xml. The new version will be created as /etc/vmware/hostd/NEW_config.xml. Please check the new file for any new values that you may need to migrate to your current config.xml. Do you want to use the current proxy port values? [yes] The current administrative user for VMware Server is 'root'. Would you like to specify a different administrator? [no] Using root as the VMware Server administrator. You have a pre-existing authorization.xml. The new version will be created as /etc/vmware/hostd/NEW_authorization.xml. Please check the new file for any new values that you may need to migrate to your current authorization.xml. You have a pre-existing vmInventory.xml. The new version will be created as /etc/vmware/hostd/NEW_vmInventory.xml. Please check the new file for any new values that you may need to migrate to your current vmInventory.xml. You have a pre-existing clients.xml. The new version will be created as /usr/lib/vmware/hostd/docroot/client/NEW_clients.xml. Please check the new file for any new values that you may need to migrate to your current clients.xml. This program previously created the file /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/work, and was about to remove it. Somebody else apparently did it already. insserv: warning: current stop runlevel(s) (0 2 3 5 6) of script `vmware' overwrites defaults (0 6). The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'hostname' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'network-interface-security' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'network-interface' missing LSB tags and overrides insserv: warning: current start runlevel(s) (0) of script `halt' overwrites defaults (empty). insserv: warning: current start runlevel(s) (0 6) of script `umountnfs.sh' overwrites defaults (empty). insserv: warning: current start runlevel(s) (0 6) of script `umountfs' overwrites defaults (empty). insserv: warning: current start runlevel(s) (0 6) of script `umountroot' overwrites defaults (empty). insserv: warning: current start runlevel(s) (6) of script `reboot' overwrites defaults (empty). insserv: warning: current start runlevel(s) (0 6) of script `sendsigs' overwrites defaults (empty). The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'module-init-tools' missing LSB tags and overrides insserv: warning: current start runlevel(s) (0 6) of script `networking' overwrites defaults (empty). The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'plymouth' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'plymouth-log' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'plymouth-splash' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'plymouth-stop' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'procps' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'udev' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'udev-finish' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'udevtrigger' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'udevmonitor' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'hwclock' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'hwclock-save' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'console-setup' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'cron' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'rsyslog' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'dmesg' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'atd' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'irqbalance' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'ufw' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'apport' missing LSB tags and overrides insserv: warning: current start runlevel(s) (0 6) of script `wpa-ifupdown' overwrites defaults (empty). insserv: script vmware-core: service VMware already provided! insserv: script vmware-mgmt: service VMware already provided! insserv: script vmware-autostart: service VMware already provided! In which directory do you want to keep your virtual machine files? [/var/lib/vmware/Virtual Machines] You have a pre-existing datastores.xml. The new version will be created as /etc/vmware/hostd/NEW_datastores.xml. Please check the new file for any new values that you may need to migrate to your current datastores.xml. Do you want to enter a serial number now? (yes/no/help) [no] Starting VMware services: Virtual machine monitor done Virtual machine communication interface done VM communication interface socket family: done Virtual ethernet done Bridged networking on /dev/vmnet0 done Host-only networking on /dev/vmnet1 (background) done DHCP server on /dev/vmnet1 done Host-only networking on /dev/vmnet8 (background) done DHCP server on /dev/vmnet8 done NAT service on /dev/vmnet8 done VMware Server Authentication Daemon (background) done Shared Memory Available done Starting VMware management services: VMware Server Host Agent (background) done VMware Virtual Infrastructure Web Access Starting VMware autostart virtual machines: Virtual machines done The configuration of VMware Server 2.0.2 build-203138 for Linux for this running kernel completed successfully. }}}