[[PageOutline]]
[[TitleIndex(TipAndDoc/Linux,format=group)]]

 * distributionを知る => lsb_release -a via twitter:tm_tn/status/134106555959349248
  * $ lsb_release -a
{{{
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 10.04.3 LTS
Release:        10.04
Codename:       lucid
}}}
  * $ lsb_release -a
{{{
LSB Version:    :core-4.0-amd64:core-4.0-ia32:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-ia32:graphics-4.0-noarch:printing-4.0-amd64:printing-4.0-ia32:printing-4.0-noarch
Distributor ID: CentOS
Description:    CentOS release 5.7 (Final)
Release:        5.7
Codename:       Final
}}}

 * しばらくするとディスプレイがブラックアウトするのを防ぐ(未検証)
  * [http://www.cyberciti.biz/tips/linux-disable-screen-blanking-screen-going-blank.html Linux disable screen blanking i.e. preventing screen going blank]
  * [http://d.hatena.ne.jp/piyocure/20100125/1264408773 ブラックアウト - piyocureのうきょきょ]

 * wikipetan:マジックSysRqキー
{{{
unRaw      （X Window Systemからキーボードの制御を取り戻す）
 tErminate （すべてのプロセスにSIGTERMシグナルを送り、正常に終了させる）
 kIll      （すべてのプロセスにSIGKILLシグナルを送り、強制的に終了させる）
  Sync     （書き込みキャッシュのデータをディスクに書き込む）
  Unmount  （すべてのファイルシステムを読み込み専用で再マウントする）
reBoot     （システムを再起動する）
}}}
  * reboot
   * Alt + SysRq + b
   * # echo b > /proc/sysrq-trigger

 = Swap =
 * $ swapon -s
{{{
Filename                                Type            Size    Used    Priority
/dev/sda1                               partition       262136  0       -1
}}}

 *  /proc/sys/vm/swappiness
 > ちなみに /proc/sys/vm/swappiness というパラメータがあって、これでスワップ具合を調整できます。
  * via [http://slashdot.jp/linux/comments.pl?sid=486449&cid=1724795 コメント: Linux カーネル 2.6.33 リリース - スラッシュドット・ジャパン]

 = disk device =
 * $ ls -ld  /dev/disk/by-*
{{{
drwxr-xr-x 2 root root 200 2011-07-19 18:17 /dev/disk/by-id
drwxr-xr-x 2 root root 140 2011-07-19 18:17 /dev/disk/by-path
drwxr-xr-x 2 root root 100 2011-07-19 17:15 /dev/disk/by-uuid
}}}
  * via [http://slashdot.jp/linux/comments.pl?sid=520826&threshold=1&commentsort=3&mode=nested&cid=1894390 コメント: Fedora15では「ethX」という表記がなくなる - スラッシュドット・ジャパン]

 = udev =
 * [http://forum.soft32.com/linux/gentoo-udev-rules-boot-SCSI-disks-ftopict332097.html |gentoo-user| udev rules and boot + SCSI disks]
 * [http://network.station.ez-net.jp/server/linux/storage/fix-scsi.asp EZ-NET： udev で SCSI デバイス名を固定する]
 * [http://www.gentoo.gr.jp/transdocs/udevrules/udevrules.html udevルールの書き方]
 * [http://www37.atwiki.jp/centos-homeserver/pages/20.html CentOSでホームサーバを作ろう - データ用HDDの準備]
 * [http://d.hatena.ne.jp/qpSHiNqp/20110214/1297651801 udevによるデバイスの命名の固定化 - しんたろの日記]
 * [http://www.cyberciti.biz/tips/linux-assign-static-names-to-scsi-devices.html Linux udev tip: Assign Static SCSI Device Name]
 * [http://baalzephon.dyndns.org/tech/index.php?udev%E3%83%A1%E3%83%A2 udevメモ - PukiWiki Plus!]

 == /dev/sda を他の名前にする ==
 * 現状では成功していない

 === 元の状態 ===
 * mitty@walken:~$ sudo udevadm info -q path -n /dev/sda
{{{
/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda
}}}

 * mitty@walken:~$ sudo udevadm info --query=all --name=/dev/sda
{{{
P: /devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda
N: sda
S: block/8:0
S: disk/by-id/scsi-SATA_ST3500418AS_6VM9ABYD
S: disk/by-id/ata-ST3500418AS_6VM9ABYD
S: disk/by-id/wwn-0x5000c5001eda26f9
S: disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda
E: MAJOR=8
E: MINOR=0
E: DEVNAME=/dev/sda
E: DEVTYPE=disk
E: SUBSYSTEM=block
E: ID_ATA=1
E: ID_TYPE=disk
E: ID_BUS=ata
E: ID_MODEL=ST3500418AS
E: ID_MODEL_ENC=ST3500418AS\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
E: ID_REVISION=CC38
E: ID_SERIAL=ST3500418AS_6VM9ABYD
E: ID_SERIAL_SHORT=6VM9ABYD
E: ID_ATA_WRITE_CACHE=1
E: ID_ATA_WRITE_CACHE_ENABLED=1
E: ID_ATA_FEATURE_SET_HPA=1
E: ID_ATA_FEATURE_SET_HPA_ENABLED=1
E: ID_ATA_FEATURE_SET_PM=1
E: ID_ATA_FEATURE_SET_PM_ENABLED=1
E: ID_ATA_FEATURE_SET_SECURITY=1
E: ID_ATA_FEATURE_SET_SECURITY_ENABLED=0
E: ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=82
E: ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN=82
E: ID_ATA_FEATURE_SET_SECURITY_FROZEN=1
E: ID_ATA_FEATURE_SET_SMART=1
E: ID_ATA_FEATURE_SET_SMART_ENABLED=1
E: ID_ATA_FEATURE_SET_AAM=1
E: ID_ATA_FEATURE_SET_AAM_ENABLED=1
E: ID_ATA_FEATURE_SET_AAM_VENDOR_RECOMMENDED_VALUE=254
E: ID_ATA_FEATURE_SET_AAM_CURRENT_VALUE=254
E: ID_ATA_DOWNLOAD_MICROCODE=1
E: ID_ATA_SATA=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN2=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN1=1
E: ID_ATA_ROTATION_RATE_RPM=7200
E: ID_WWN=0x5000c5001eda26f9
E: ID_WWN_WITH_EXTENSION=0x5000c5001eda26f9
E: ID_SCSI_COMPAT=SATA_ST3500418AS_6VM9ABYD
E: ID_PATH=pci-0000:00:1f.2-scsi-0:0:0:0
E: ID_PART_TABLE_TYPE=dos
E: UDISKS_PRESENTATION_NOPOLICY=0
E: UDISKS_PARTITION_TABLE=1
E: UDISKS_PARTITION_TABLE_SCHEME=mbr
E: UDISKS_PARTITION_TABLE_COUNT=2
E: UDISKS_ATA_SMART_IS_AVAILABLE=1
E: DEVLINKS=/dev/block/8:0 /dev/disk/by-id/scsi-SATA_ST3500418AS_6VM9ABYD /dev/disk/by-id/ata-ST3500418AS_6VM9ABYD /dev/disk/by-id/wwn-0x5000c5001eda26f9 /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0

}}}

 * mitty@walken:~$ sudo udevadm info -a --name=/dev/sda
{{{

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda':
    KERNEL=="sda"
    SUBSYSTEM=="block"
    DRIVER==""
    ATTR{range}=="16"
    ATTR{ext_range}=="256"
    ATTR{removable}=="0"
    ATTR{ro}=="0"
    ATTR{size}=="976773168"
    ATTR{alignment_offset}=="0"
    ATTR{discard_alignment}=="0"
    ATTR{capability}=="50"
    ATTR{stat}=="    7129      217   287320    92724     2036      269    47453   141436        0    35592   234152"
    ATTR{inflight}=="       0        0"
    ATTR{events}==""
    ATTR{events_async}==""
    ATTR{events_poll_msecs}=="-1"

  looking at parent device '/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0':
    KERNELS=="2:0:0:0"
    SUBSYSTEMS=="scsi"
    DRIVERS=="sd"
    ATTRS{device_blocked}=="0"
    ATTRS{type}=="0"
    ATTRS{scsi_level}=="6"
    ATTRS{vendor}=="ATA     "
    ATTRS{model}=="ST3500418AS     "
    ATTRS{rev}=="CC38"
    ATTRS{state}=="running"
    ATTRS{timeout}=="30"
    ATTRS{iocounterbits}=="32"
    ATTRS{iorequest_cnt}=="0x24dc"
    ATTRS{iodone_cnt}=="0x24c0"
    ATTRS{ioerr_cnt}=="0xc"
    ATTRS{modalias}=="scsi:t-0x00"
    ATTRS{evt_media_change}=="0"
    ATTRS{queue_depth}=="31"
    ATTRS{queue_ramp_up_period}=="120000"
    ATTRS{queue_type}=="simple"

  looking at parent device '/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0':
    KERNELS=="target2:0:0"
    SUBSYSTEMS=="scsi"
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1f.2/host2':
    KERNELS=="host2"
    SUBSYSTEMS=="scsi"
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1f.2':
    KERNELS=="0000:00:1f.2"
    SUBSYSTEMS=="pci"
    DRIVERS=="ahci"
    ATTRS{vendor}=="0x8086"
    ATTRS{device}=="0x3b22"
    ATTRS{subsystem_vendor}=="0x8086"
    ATTRS{subsystem_device}=="0x0037"
    ATTRS{class}=="0x010601"
    ATTRS{irq}=="49"
    ATTRS{local_cpus}=="00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000f"
    ATTRS{local_cpulist}=="0-3"
    ATTRS{modalias}=="pci:v00008086d00003B22sv00008086sd00000037bc01sc06i01"
    ATTRS{numa_node}=="-1"
    ATTRS{dma_mask_bits}=="64"
    ATTRS{consistent_dma_mask_bits}=="64"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

}}}


 * mitty@walken:~$ sudo /lib/udev/scsi_id --page=0x83 --whitelisted --device=/dev/sda
{{{
35000c5001eda26f9
}}}
 * mitty@walken:~$ sudo /lib/udev/scsi_id -g -u --device /dev/sda
{{{
35000c5001eda26f9
}}}

 * mitty@walken:~$ ls -l /sys/block/
{{{
total 0
lrwxrwxrwx 1 root root 0 Apr 16 15:09 loop0 -> ../devices/virtual/block/loop0
lrwxrwxrwx 1 root root 0 Apr 16 15:09 loop1 -> ../devices/virtual/block/loop1
lrwxrwxrwx 1 root root 0 Apr 16 15:09 loop2 -> ../devices/virtual/block/loop2
lrwxrwxrwx 1 root root 0 Apr 16 15:09 loop3 -> ../devices/virtual/block/loop3
lrwxrwxrwx 1 root root 0 Apr 16 15:09 loop4 -> ../devices/virtual/block/loop4
lrwxrwxrwx 1 root root 0 Apr 16 15:09 loop5 -> ../devices/virtual/block/loop5
lrwxrwxrwx 1 root root 0 Apr 16 15:09 loop6 -> ../devices/virtual/block/loop6
lrwxrwxrwx 1 root root 0 Apr 16 15:09 loop7 -> ../devices/virtual/block/loop7
lrwxrwxrwx 1 root root 0 Apr 16 15:09 sda -> ../devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda
lrwxrwxrwx 1 root root 0 Apr 16 15:09 sr0 -> ../devices/pci0000:00/0000:00:1f.2/host5/target5:0:0/5:0:0:0/block/sr0
}}}

 === 実験 ===
 * /etc/udev/rules.d/10-fixed_hdd.rules
{{{
# set device name for ST3500418AS 6VM9ABYD
SUBSYSTEMS=="block", ENV{ID_SERIAL}=="ST3500418AS_6VM9ABYD", NAME="sdx%n"
}}}
  * 成功しないがエラーも出ない

 * /etc/udev/rules.d/10-fixed_hdd.rules
{{{
# set device name for ST3500418AS 6VM9ABYD
SUBSYSTEMS=="block", PROGRAM=="/lib/udev/scsi_id -g -u --device %p", RESULT=="35000c5001eda26f9", NAME="sdx%n"
}}}
  * mitty@walken:~$ sudo udevadm test /devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda
{{{
run_command: calling: test
udevadm_test: version 164
This program is for debugging only, it does not run any program,
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.

parse_file: reading '/etc/udev/rules.d/10-fixed_hdd.rules' as rules file
parse_file: reading '/lib/udev/rules.d/40-hplip.rules' as rules file

(snip)

udev_rules_new: rules use 231672 bytes tokens (19306 * 12 bytes), 35564 bytes buffer
udev_rules_new: temporary index used 60940 bytes (3047 * 20 bytes)
udev_device_new_from_syspath: device 0x7f1093f7c340 has devpath '/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda'
udev_device_new_from_syspath: device 0x7f1093f7cee0 has devpath '/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda'
udev_device_read_db: device 0x7f1093f7cee0 filled with db file data
udev_rules_apply_to_event: PROGRAM '/lib/udev/scsi_id -g -u --device /devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda' /etc/udev/rules.d/10-fixed_hdd.rules:2
util_run_program: '/lib/udev/scsi_id -g -u --device /devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda' started
util_run_program: '/lib/udev/scsi_id -g -u --device /devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda' returned with exitcode 1
udev_device_new_from_syspath: device 0x7f1093f7c5c0 has devpath '/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0'
udev_device_new_from_syspath: device 0x7f1093f77e30 has devpath '/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0'
udev_device_new_from_syspath: device 0x7f1093f78160 has devpath '/devices/pci0000:00/0000:00:1f.2/host2'
udev_device_new_from_syspath: device 0x7f1093f78480 has devpath '/devices/pci0000:00/0000:00:1f.2'
udev_device_new_from_syspath: device 0x7f1093f78790 has devpath '/devices/pci0000:00'

(snip)
}}}
  * mitty@walken:~$ grep scsi_id /var/log/syslog
{{{
Apr 16 16:17:48 walken scsi_id[4773]: custom logging function 0x7f3411a38010 registered
Apr 16 16:17:48 walken scsi_id[4773]: scsi_id: cannot open /devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda: No such file or directory
Apr 16 16:17:48 walken scsi_id[4776]: custom logging function 0x7f96ccf96010 registered
}}}
  * scsi_idのオプションが変わった模様
   * [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493075 #493075 - scsi_id changed commandline syntax (breaks multipath) - Debian Bug report logs]

 * /etc/udev/rules.d/10-fixed_hdd.rules
{{{
# set device name for ST3500418AS 6VM9ABYD
SUBSYSTEMS=="block", DEVPATH=="/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda", NAME="sdx%n"
}}}
  * boot中のコンソール画面
{{{
Waiting for /dev to be fully populated...udevd-work[353]: kernel-provided name '
sda' and NAME= 'sdx' disagree, please use SYMLINK+= or change the kernel to prov
ide the proper name
}}}
  * mitty@walken:~$ ls -l /dev/sd*
{{{
brw------- 1 root root 8, 0 Apr 16 16:30 /dev/sda
brw-rw---- 1 root disk 8, 1 Apr 16 16:30 /dev/sda1
brw-rw---- 1 root disk 8, 2 Apr 16 16:30 /dev/sda2
brw-rw---- 1 root disk 8, 0 Apr 16 16:30 /dev/sdx
}}}
  * mitty@walken:~$ sudo fdisk -lu /dev/sda
{{{
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00086666

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   961177599   480587776   83  Linux
/dev/sda2       961177600   976771071     7796736   82  Linux swap / Solaris
}}}
  * mitty@walken:~$ sudo fdisk -lu /dev/sdx
{{{
Disk /dev/sdx: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00086666

   Device Boot      Start         End      Blocks   Id  System
/dev/sdx1   *        2048   961177599   480587776   83  Linux
/dev/sdx2       961177600   976771071     7796736   82  Linux swap / Solaris
}}}
  * mitty@walken:~$ ls -l /sys/block/
{{{
total 0
lrwxrwxrwx 1 root root 0 Apr 16 16:51 loop0 -> ../devices/virtual/block/loop0
lrwxrwxrwx 1 root root 0 Apr 16 16:51 loop1 -> ../devices/virtual/block/loop1
lrwxrwxrwx 1 root root 0 Apr 16 16:51 loop2 -> ../devices/virtual/block/loop2
lrwxrwxrwx 1 root root 0 Apr 16 16:51 loop3 -> ../devices/virtual/block/loop3
lrwxrwxrwx 1 root root 0 Apr 16 16:51 loop4 -> ../devices/virtual/block/loop4
lrwxrwxrwx 1 root root 0 Apr 16 16:51 loop5 -> ../devices/virtual/block/loop5
lrwxrwxrwx 1 root root 0 Apr 16 16:51 loop6 -> ../devices/virtual/block/loop6
lrwxrwxrwx 1 root root 0 Apr 16 16:51 loop7 -> ../devices/virtual/block/loop7
lrwxrwxrwx 1 root root 0 Apr 16 16:51 sda -> ../devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda
lrwxrwxrwx 1 root root 0 Apr 16 16:51 sr0 -> ../devices/pci0000:00/0000:00:1f.2/host5/target5:0:0/5:0:0:0/block/sr0
}}}
   * 元のまま

 * /etc/udev/rules.d/10-fixed_hdd.rules
{{{
# set device name for ST3500418AS 6VM9ABYD
SUBSYSTEMS=="block", ATTR{size}=="976773168" , NAME="sdx%n"
}}}
  * 同じエラー
{{{
Waiting for /dev to be fully populated...udevd-work[353]: kernel-provided name '
sda' and NAME= 'sdx' disagree, please use SYMLINK+= or change the kernel to prov
ide the proper name
}}}

 = BackTrack =
 * [http://ryanunderdown.com/linux/cracking-wep-using-backtrack.php Cracking WEP Using Backtrack: A Beginner’s Guide | Ryan Underdown]
 * [http://samiux.blogspot.jp/2011/05/howto-wep-cracking-with-backtrack-5.html Samiux's Blog: HOWTO : WEP cracking with Back|Track 5]
 * [http://reisato.plala.jp/rsato/weblog/2009/10/18/2230.html GS-27USB付属のBackTrack 3でWEPキーを解析する - R SATO Weblog]
 * [http://bogus.jp/wp/?p=469 今年こそ使いこなしたい無線LAN攻撃ツール5 at bogus press]
 * [http://xeoshift.webs.com/apps/blog/show/7253600-how-to-crack-wep-with-backtrack-5 How to crack WEP with BackTrack 5 - XeoShift]
 * [http://www.rafayhackingarticles.net/2011/10/cracking-wep-key-with-backtrack-5.html Cracking The WEP Key With Backtrack 5 | Learn How To Hack - Ethical Hacking and security tips]

 * [http://ipw2200.sourceforge.net/firmware.php Intel® PRO/Wireless 2200BG Driver Firmware]
  * ipw2200 -> 1.2.2kmprp

 * sshd
  * sshd-generate
  * service ssh start