wiki:TipAndDoc/Linux/LXC

Version 38 (modified by mitty, 11 years ago) (diff)

--

  1. Ubuntu 12.04
    1. lxcbr0
  2. USE_LXC_BRIDGE="false"
    1. ip forwarding
    2. change apt repository mirror and disable auto start lxcbr0
    3. host settings
      1. iptables on host
    4. make LXC container with ubuntu template
      1. set container IP with LXC/config
      2. set container IP with interfaces
  3. two NICs in one container
    1. example
  4. mount bind
    1. read-only bind
  5. X11 with VNC
    1. common packages
    2. GNOME
    3. Xfce
    4. LXDE
  6. munin plugin
    1. lxc_proc
      1. Debian 6.0
      2. Ubuntu 12.04
        1. /etc/fstab
        2. cgroup-lite
        3. cgroup-bin
  7. mount inside container
    1. ホストで直接mountし、コンテナには--bindでアクセスさせる

  • LinuX Container
  • ホスト側のvethデバイス名を指定する
    • ​lxc-chroot-linux-containers - Re: (Lxc-users) veth name - msg#00058 - Recent Discussion OSDir.com
    • man 5 lxc.conf

      By default lxc choose a name for the network device belonging to the outside of the container, this name is handled by lxc, but if you wish to handle this name yourself, you can tell lxc to set a specific name with the lxc.network.veth.pair option.

    • 複数のコンテナで同じ名前のpairを指定すると、二つ目は起動しない(下記の例ではtest1, test2コンテナでlxc.network.veth.pair = testと指定)
    • $ sudo lxc-start -n test2 
      lxc-start: failed to create test-vethNdql6o : File exists
lxc-start: failed to create netdev
lxc-start: failed to create the network
lxc-start: failed to spawn 'test2'
lxc-start: No such file or directory - failed to remove cgroup '/sys/fs/cgroup/cpu/sysdefault/lxc/test2'
  • 指定しない場合、mktemp("vethXXXXXX")で決定される
    • ​SourceForge - lxc/lxc/blob - src/lxc/conf.c

      static int instanciate_veth(struct lxc_handler *handler, struct lxc_netdev *netdev)

    • ホスト側の物理NIC(lxc.network.link)とリンクするveth1の名前やifindexを外部から知る手段が無い模様
      • $ sudo lxc-start -d -n test -o test.log -l DEBUG 
              lxc-start 1356615687.534 DEBUG    lxc_conf - instanciated veth 'vethtgqRWu/vethnwRgNf', index is '99'
      • lxc.network.veth.pair = vtest とすると以下の様になる 
              lxc-start 1356615810.522 DEBUG    lxc_conf - instanciated veth 'vtest/vethA3QwQ9', index is '102'
  • mitty@precise:~$ lxc-create -t ubuntu -h 
    usage: lxc-create -n <name> [-f configuration] [-t template] [-h] -- [template_options]
usage: lxc-create -n <name> [-f configuration] [-t template] [-h] [fsopts] -- [template_options]
   fsopts: -B none
   fsopts: -B lvm [--lvname lvname] [--vgname vgname] [--fstype fstype] [--fssize fssize]
   fsopts: -B btrfs
           flag is not necessary, if possible btrfs support will be used

creates a lxc system object.

Options:
name         : name of the container
configuration: lxc configuration
template     : lxc-template is an accessible template script

The container backing store can be altered using '-B'.  By default it
is 'none', which is a simple directory tree under /var/lib/lxc/<name>/rootfs
Otherwise, the following option values may be relevant:
lvname       : [for -lvm] name of lv in which to create lv,
                container-name by default
vgname       : [for -lvm] name of vg in which to create lv, 'lxc' by default
fstype       : name of filesystem to create, ext4 by default
fssize       : size of filesystem to create, 1G by default

template-specific help follows: (these options follow '--')
/usr/lib/lxc/templates/lxc-ubuntu -h|--help [-a|--arch] [-b|--bindhome <user>] [--trim] [-d|--debug]
   [-F | --flush-cache] [-r|--release <release>] [ -S | --auth-key <keyfile>]
release: the ubuntu release (e.g. precise): defaults to host release on ubuntu, otherwise uses latest LTS
trim: make a minimal (faster, but not upgrade-safe) container
bindhome: bind <user>'s home into the container
          The ubuntu user will not be created, and <user> will have
          sudo access.
arch: the container architecture (e.g. amd64): defaults to host arch
auth-key: SSH Public key file to inject into container

Ubuntu 12.04

  • mitty@precise:~$ sudo aptitude install lxc 
    The following NEW packages will be installed:
  bridge-utils{a} cgroup-lite{a} cloud-utils{a} debootstrap{a}
  dnsmasq-base{a} euca2ools{a} libapparmor1{a} libcap2-bin{a} libgmp10{a}
  libnetfilter-conntrack3{a} libpam-cap{a} libyaml-0-2{a} lxc
  python-boto{a} python-crypto{a} python-m2crypto{a} python-paramiko{a}
  python-yaml{a}
0 packages upgraded, 18 newly installed, 0 to remove and 0 not upgraded.
Need to get 2,873 kB of archives. After unpacking 16.1 MB will be used.

lxcbr0

  • mitty@precise:~$ ifconfig lxcbr0 
    lxcbr0    Link encap:Ethernet  HWaddr 12:5e:23:12:4a:0f
          inet addr:10.0.3.1  Bcast:10.0.3.255  Mask:255.255.255.0
          inet6 addr: fe80::105e:23ff:fe12:4a0f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:554 (554.0 B)
    • /etc/default/lxc 
      USE_LXC_BRIDGE="true"


LXC_BRIDGE="lxcbr0"
LXC_ADDR="10.0.3.1"
LXC_NETMASK="255.255.255.0"
LXC_NETWORK="10.0.3.0/24"
LXC_DHCP_RANGE="10.0.3.2,10.0.3.254"
LXC_DHCP_MAX="253"
    • /etc/lxc/lxc.conf 
      lxc.network.type=veth
lxc.network.link=lxcbr0
lxc.network.flags=up
    • /etc/dnsmasq.d/lxc 
      bind-interfaces
except-interface=lxcbr0
  • /etc/init/lxc-net.conf も参考になる

USE_LXC_BRIDGE="false"

  • 手動でLXCコンテナのNAT設定を行う
  • eth0 -> br0にブリッジされていて、KVMで使用
    • LXCとKVMの共存のテスト

ip forwarding

  • mitty@precise:~$ cat /etc/sysctl.d/60-ip_forward.conf 
    net.ipv4.ip_forward=1
net.ipv6.conf.all.forwarding=1
  • mitty@precise:~$ cat /etc/network/interfaces 
    # This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet manual

auto br0
iface br0 inet dhcp
	bridge_ports eth0 eth0
	bridge_maxwait 0

auto lxcbr0
iface lxcbr0 inet static
	bridge_ports none
	bridge_maxwait 0
	address 10.0.0.254
	netmask 255.255.255.0
	post-up iptables -A POSTROUTING -s 10.0.0.0/24 -t nat -j MASQUERADE
	pre-down iptables -D POSTROUTING -s 10.0.0.0/24 -t nat -j MASQUERADE

change apt repository mirror and disable auto start lxcbr0

  • デフォルトのミラーが遅いので、ftp.tsukubaに変更
  • lxcの起動スクリプトによるlxcbr0の作成を抑制
  • mitty@precise:~$ cat /etc/default/lxc 
    MIRROR="http://ftp.tsukuba.wide.ad.jp/Linux/ubuntu"

USE_LXC_BRIDGE="false"

host settings

  • mitty@precise:~$ ifconfig -a 
    br0       Link encap:Ethernet  HWaddr 52:54:00:bc:53:bc
          inet addr:192.168.10.172  Bcast:192.168.10.255  Mask:255.255.255.0
          inet6 addr: fe80::5054:ff:febc:53bc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1340 errors:0 dropped:0 overruns:0 frame:0
          TX packets:948 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:116870 (116.8 KB)  TX bytes:111171 (111.1 KB)

eth0      Link encap:Ethernet  HWaddr 52:54:00:bc:53:bc
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1400 errors:0 dropped:0 overruns:0 frame:0
          TX packets:945 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:150975 (150.9 KB)  TX bytes:110725 (110.7 KB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lxcbr0    Link encap:Ethernet  HWaddr 4a:5a:12:a4:0a:ac
          inet addr:10.0.0.254  Bcast:10.0.0.255  Mask:255.255.255.0
          inet6 addr: fe80::485a:12ff:fea4:aac/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:408 (408.0 B)
  • mitty@precise:~$ ip route 
    default via 192.168.10.254 dev br0  metric 100
10.0.0.0/24 dev lxcbr0  proto kernel  scope link  src 10.0.0.254
192.168.10.0/24 dev br0  proto kernel  scope link  src 192.168.10.172
  • mitty@precise:~$ brctl show 
    bridge name     bridge id               STP enabled     interfaces
br0             8000.525400bc53bc       no              eth0
lxcbr0          8000.000000000000       no

iptables on host

  • mitty@precise:~$ sudo iptables -L -t nat -vx 
    Chain PREROUTING (policy ACCEPT 30 packets, 10827 bytes)
    pkts      bytes target     prot opt in     out     source               destination

Chain INPUT (policy ACCEPT 4 packets, 323 bytes)
    pkts      bytes target     prot opt in     out     source               destination

Chain OUTPUT (policy ACCEPT 83 packets, 5999 bytes)
    pkts      bytes target     prot opt in     out     source               destination

Chain POSTROUTING (policy ACCEPT 83 packets, 5999 bytes)
    pkts      bytes target     prot opt in     out     source               destination
       0        0 MASQUERADE  all  --  any    any     10.0.0.0/24          anywhere
  • MASQUERADEが正しく設定されている

make LXC container with ubuntu template

  • mitty@precise:~$ sudo lxc-create -t ubuntu -n lxc-test 
    No config file specified, using the default config
debootstrap is /usr/sbin/debootstrap
Checking cache download in /var/cache/lxc/precise/rootfs-amd64 ...
installing packages: vim,ssh
Downloading ubuntu precise minimal ...
I: Retrieving Release
I: Retrieving Release.gpg
I: Checking Release signature

....

I: Checking component main on http://ftp.tsukuba.wide.ad.jp/Linux/ubuntu...

....

Processing triggers for initramfs-tools ...
Download complete
Copy /var/cache/lxc/precise/rootfs-amd64 to /var/lib/lxc/lxc-test/rootfs ...
Copying rootfs to /var/lib/lxc/lxc-test/rootfs ...

##
# The default user is 'ubuntu' with password 'ubuntu'!
# Use the 'sudo' command to run tasks as root in the container.
##

'ubuntu' template installed
'lxc-test' created

set container IP with LXC/config

  • LXCコンテナのconfigファイルからIPアドレスを指定する
  • 結論としては、デフォルトゲートウェイなどを設定できないので、不便
  • mitty@precise:~$ sudo vim /var/lib/lxc/lxc-test/config 
    lxc.network.ipv4 = 10.0.0.10/24
  • mitty@precise:~$ sudo lxc-start -n lxc-test -d
  • mitty@precise:~$ ping 10.0.0.10 -c 1 
    PING 10.0.0.10 (10.0.0.10) 56(84) bytes of data.
64 bytes from 10.0.0.10: icmp_req=1 ttl=64 time=0.060 ms

--- 10.0.0.10 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
  • mitty@precise:~$ ssh 10.0.0.10 -l ubuntu
    • ubuntu@lxc-test:~$ ifconfig 
      eth0      Link encap:Ethernet  HWaddr 00:16:3e:ba:3e:ef
          inet addr:10.0.0.10  Bcast:10.0.0.255  Mask:255.255.255.0
    • ubuntu@lxc-test:~$ ip route 
      10.0.0.0/24 dev eth0  proto kernel  scope link  src 10.0.0.10
    • ubuntu@lxc-test:~$ ping 8.8.8.8 
      connect: Network is unreachable

set container IP with interfaces

  • ホストOS上から、あらかじめコンテナのinterfacesファイルを設定して、起動する
  • 間違いが無く、かつ楽そう
  • mitty@precise:~$ sudo vim /var/lib/lxc/lxc-test/rootfs/etc/network/interfaces 
    auto eth0
iface eth0 inet static
	address 10.0.0.1
	netmask 255.255.255.0
	gateway 10.0.0.254
  • mitty@precise:~$ ssh 10.0.0.1 -l ubuntu
    • ubuntu@lxc-test:~$ ifconfig 
      eth0      Link encap:Ethernet  HWaddr 00:16:3e:ba:3e:ef
          inet addr:10.0.0.1  Bcast:10.0.0.255  Mask:255.255.255.0
    • ubuntu@lxc-test:~$ ip route 
      default via 10.0.0.254 dev eth0  metric 100
10.0.0.0/24 dev eth0  proto kernel  scope link  src 10.0.0.1
    • ubuntu@lxc-test:~$ ping 8.8.8.8 -c 1 
      PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_req=1 ttl=52 time=7.66 ms

--- 8.8.8.8 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 7.667/7.667/7.667/0.000 ms

two NICs in one container

example

  • 通常のbridge(veth)ではなくmacvlanであるが、vethでも同じはず
  • /var/lib/lxc/test/config 
    lxc.network.type=macvlan
lxc.network.macvlan.mode=bridge
lxc.network.link=em1
lxc.network.flags=up
lxc.network.hwaddr = 00:16:3e:85:2e:da
lxc.network.type=macvlan
lxc.network.macvlan.mode=bridge
lxc.network.link=em1
lxc.network.flags=up
lxc.network.hwaddr = 00:16:3e:85:2e:db
  • mitty@test:~$ ifconfig -a | egrep 'addr|Link' 
    eth0      Link encap:Ethernet  HWaddr 00:16:3e:85:2e:da
          inet addr:192.168.83.207  Bcast:192.168.83.255  Mask:255.255.255.0
          inet6 addr: fe80::216:3eff:fe85:2eda/64 Scope:Link
eth1      Link encap:Ethernet  HWaddr 00:16:3e:85:2e:db
          inet addr:192.168.83.212  Bcast:192.168.83.255  Mask:255.255.255.0
          inet6 addr: fe80::216:3eff:fe85:2edb/64 Scope:Link
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
  • mitty@test:~$ ip route 
    default via 192.168.83.243 dev eth0
192.168.83.0/24 dev eth0  proto kernel  scope link  src 192.168.83.207
192.168.83.0/24 dev eth1  proto kernel  scope link  src 192.168.83.212

mount bind

  • /var/lib/lxc/>container name>/fstab を用いて、ホストの特定ディレクトリ以下をゲストにbind出来る
  • fstab 
    /media mnt none bind 0 0
    • host:/media -> guest:/mnt とマウントされる
    • mntに「/」が無いことに注意
    • mitty@lxc:~$ mount 
      /dev/disk/by-uuid/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX on /mnt type ext4 (rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered)
    • mitty@lxc:~$ ls -l /mnt/ 
      total 0
-rw-r--r-- 1 root root 0 Oct 23 22:01 host-media
  1. mitty@lxc:~$ sudo rm /mnt/host-media 
    removed `/mnt/host-media'
  2. mitty@host:~$ ls -l /media/host-media 
    ls: cannot access /media/host-media: No such file or directory

read-only bind

  • fstab 
    /media mnt none bind,ro 0 0
  • mountコマンドの出力結果は「(rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered)」で変わらないが、read-only化される
  • mitty@lxc:~$ sudo rm /mnt/host-media 
    rm: cannot remove `/mnt/host-media': Read-only file system

X11 with VNC

  • 12.04上のLXCでは、configのcgroupの設定やmknodなどは特に必要ない模様
  • vnc自体については => network/vnc
  • 基本的にaptitude install -Rでインストールしている
  • エラーメッセージについては ~/.vnc/ 以下に保存されるログファイルから

common packages

  • vnc4server
  • xfonts-base 
    could not open default font 'fixed'

GNOME

  • ~/.vnc/xstartup 
    xsetroot -solid grey
exec gnome-session &

Xfce

  • xfce4
  • ~/.vnc/xstartup 
    xsetroot -solid grey
exec startxfce4 &
  • もしくは 
    xsetroot -solid grey
exec xfce4-session &
  • 後者だとTrashディレクトリなどがFile Managerに表示されない
    • ファイルアイコンが表示されない

LXDE

  • lxde
  • ~/.vnc/xstartup 
    xsetroot -solid grey
exec lxsession -s LXDE &
    • -s LXDEは無くても良い模様

munin plugin

lxc_proc

  • ​https://www.kernel.org/doc/Documentation/cgroups/cgroups.txt

    Each cgroup is represented by a directory in the cgroup file system containing the following files describing that cgroup:

    • tasks: list of tasks (by pid) attached to that cgroup. This list is not guaranteed to be sorted. Writing a thread id into this file moves the thread into this cgroup.
    • cgroup.procs: list of tgids in the cgroup. This list is not guaranteed to be sorted or free of duplicate tgids, and userspace should sort/uniquify the list if this property is required. Writing a thread group id into this file moves all threads in that group into this cgroup.
    • notify_on_release flag: run the release agent on exit?
    • release_agent: the path to use for release notifications (this file exists in the top cgroup only)
  • まとめ
    • lxc-cgroupコマンドを使わない場合、以下のsysfsにアクセスすると良い模様
    • Debian 6.0: /sys/fs/cgroup/<container>/tasks
    • Ubuntu 12.04 with fstab: /sys/fs/cgroup/lxc/<container>/tasks
    • Ubuntu 12.04 with cgroup-lite: /sys/fs/cgroup/cpuacct/lxc/<container>/tasks
    • Ubuntu 12.04 with cgroup-bin: /sys/fs/cgroup/cpuacct/sysdefault/lxc/<container>/tasks

Debian 6.0

  • ​http://wiki.debian.org/LXC

    Add this line to /etc/fstab 

    cgroup  /sys/fs/cgroup  cgroup  defaults  0   0

    Try to mount it (a reboot solves an eventual "resource busy problem" in any case) 

    mount /sys/fs/cgroup
  • $ sudo lxc-start -d -n lxc-test
  • $ sudo lxc-cgroup -n lxc-test tasks 
    1432
1569
1571
1598
  • $ ls -1F /sys/fs/cgroup/ 
    cgroup.procs
cpuacct.stat
cpuacct.usage
cpuacct.usage_percpu
cpuset.cpu_exclusive
cpuset.cpus
cpuset.mem_exclusive
cpuset.mem_hardwall
cpuset.memory_migrate
cpuset.memory_pressure
cpuset.memory_pressure_enabled
cpuset.memory_spread_page
cpuset.memory_spread_slab
cpuset.mems
cpuset.sched_load_balance
cpuset.sched_relax_domain_level
cpu.shares
devices.allow
devices.deny
devices.list
lxc-test/
net_cls.classid
notify_on_release
release_agent
tasks
    • /sys/fs/cgroup/lxc-test/ も同じ構造
  • $ cat /sys/fs/cgroup/lxc-test/tasks 
    1432
1569
1571
1598

Ubuntu 12.04

  • Ubuntu 12.04 with aptitude install -R lxc
    • cgroup関係のパッケージは-Rをつけるとインストールされない
  • $ ls -1F /sys/fs/cgroup/
    • N/A
  • $ sudo lxc-start -n lxc-test 
    lxc-start: failed to spawn 'lxc-test'

/etc/fstab

  • Ubuntu 12.04 with /etc/fstab:cgroup /sys/fs/cgroup cgroup defaults 0 0
    • 起動時に自動でマウントされないため、mount -aする必要がある
  • $ sudo mount -a
  • $ sudo lxc-start -d -n lxc-test
  • $ sudo lxc-cgroup -n lxc-test tasks 
    lxc-cgroup: cgroup is not mounted
lxc-cgroup: failed to retrieve value of 'tasks' for 'lxc-test'
  • $ ls -1F /sys/fs/cgroup/ 
    blkio.io_merged
blkio.io_queued
blkio.io_service_bytes
blkio.io_serviced
blkio.io_service_time
blkio.io_wait_time
blkio.reset_stats
blkio.sectors
blkio.throttle.io_service_bytes
blkio.throttle.io_serviced
blkio.throttle.read_bps_device
blkio.throttle.read_iops_device
blkio.throttle.write_bps_device
blkio.throttle.write_iops_device
mitty@lein:~$ ls -1F /sys/fs/cgroup/
blkio.io_merged
blkio.io_queued
blkio.io_service_bytes
blkio.io_serviced
blkio.io_service_time
blkio.io_wait_time
blkio.reset_stats
blkio.sectors
blkio.throttle.io_service_bytes
blkio.throttle.io_serviced
blkio.throttle.read_bps_device
blkio.throttle.read_iops_device
blkio.throttle.write_bps_device
blkio.throttle.write_iops_device
blkio.time
blkio.weight
blkio.weight_device
cgroup.clone_children
cgroup.event_control
cgroup.procs
cpuacct.stat
cpuacct.usage
cpuacct.usage_percpu
cpu.cfs_period_us
cpu.cfs_quota_us
cpu.rt_period_us
cpu.rt_runtime_us
cpuset.cpu_exclusive
cpuset.cpus
cpuset.mem_exclusive
cpuset.mem_hardwall
cpuset.memory_migrate
cpuset.memory_pressure
cpuset.memory_pressure_enabled
cpuset.memory_spread_page
cpuset.memory_spread_slab
cpuset.mems
cpuset.sched_load_balance
cpuset.sched_relax_domain_level
cpu.shares
cpu.stat
devices.allow
devices.deny
devices.list
lxc/
memory.failcnt
memory.force_empty
memory.limit_in_bytes
memory.max_usage_in_bytes
memory.memsw.failcnt
memory.memsw.limit_in_bytes
memory.memsw.max_usage_in_bytes
memory.memsw.usage_in_bytes
memory.move_charge_at_immigrate
memory.numa_stat
memory.oom_control
memory.soft_limit_in_bytes
memory.stat
memory.swappiness
memory.usage_in_bytes
memory.use_hierarchy
notify_on_release
release_agent
tasks
    • /sys/fs/cgroup/lxc/, /sys/fs/cgroup/lxc/lxc-test/ も同じ構造
  • $ cat /sys/fs/cgroup/lxc/lxc-test/tasks 
    2712
2867
2932
2943
2947
2952
2953
2954
2983
3002
3031
3036
3037
3042
3056
3058

cgroup-lite

  • Ubuntu 12.04 with cgroup-lite
    • aptitude install時に-Rとしない場合、cgroup-liteがRecommendsからインストールされる
    • /bin/cgroups-mount 
      mount -t tmpfs -o uid=0,gid=0,mode=0755 cgroup /sys/fs/cgroup
  • $ sudo lxc-cgroup -n lxc-test tasks 
    lxc-cgroup: cgroup is not mounted
lxc-cgroup: failed to retrieve value of 'tasks' for 'lxc-test'
  • $ ls -1F /sys/fs/cgroup/ 
    blkio/
cpu/
cpuacct/
cpuset/
devices/
freezer/
memory/
perf_event/
    • $ find /sys/fs/cgroup/ | grep lxc-test/tasks | xargs wc 
      17 17 102 /sys/fs/cgroup/perf_event/lxc/lxc-test/tasks
17 17 102 /sys/fs/cgroup/blkio/lxc/lxc-test/tasks
17 17 102 /sys/fs/cgroup/freezer/lxc/lxc-test/tasks
17 17 102 /sys/fs/cgroup/devices/lxc/lxc-test/tasks
17 17 102 /sys/fs/cgroup/memory/lxc/lxc-test/tasks
17 17 102 /sys/fs/cgroup/cpuacct/lxc/lxc-test/tasks
17 17 102 /sys/fs/cgroup/cpu/lxc/lxc-test/tasks
17 17 102 /sys/fs/cgroup/cpuset/lxc/lxc-test/tasks
  • $ cat /sys/fs/cgroup/perf_event/lxc/lxc-test/tasks 
    17390
17539
17556
17560
17562
17567
17568
17570
17599
17621
17647
17651
17654
17659
17678
17681
17829

cgroup-bin

  • Ubuntu 12.04 with cgroup-bin
    • cgroup-binとcgroup-liteはコンフリクトする
    • /etc/init/cgconfig.conf 
      mount -t tmpfs -o uid=0,gid=0,mode=0755 cgroups /sys/fs/cgroup
  • $ sudo lxc-cgroup -n lxc-test tasks 
    lxc-cgroup: cgroup is not mounted
lxc-cgroup: failed to retrieve value of 'tasks' for 'lxc-test'
  • $ ls -1F /sys/fs/cgroup/ 
    cpu/
cpuacct/
devices/
freezer/
memory/
    • $ find /sys/fs/cgroup/ | grep lxc-test/tasks | xargs wc 
      16 16 80 /sys/fs/cgroup/freezer/sysdefault/lxc/lxc-test/tasks
16 16 80 /sys/fs/cgroup/memory/sysdefault/lxc/lxc-test/tasks
16 16 80 /sys/fs/cgroup/devices/sysdefault/lxc/lxc-test/tasks
16 16 80 /sys/fs/cgroup/cpuacct/sysdefault/lxc/lxc-test/tasks
16 16 80 /sys/fs/cgroup/cpu/sysdefault/lxc/lxc-test/tasks
  • $ cat /sys/fs/cgroup/freezer/sysdefault/lxc/lxc-test/tasks 
    1296
1390
1434
1461
1470
1471
1473
1474
1502
1524
1552
1562
1563
1566
1580
1582

mount inside container

  • コンテナの中ではAppArmorによってmountが禁止されているため、直接NFSマウントするにはAppArmorの再設定が必要

ホストで直接mountし、コンテナには--bindでアクセスさせる

  • /var/lib/lxc/CONTAINER/fstab 
    /mnt/somewhere   path/to/mountdir    none bind 0 0
  • host# mount nfsserver:/path/to/export /mnt/somewhere
  • host# lxc-start -d -n CONTAINER
  • lxc$ mount 
    nfsserver:/path/to/export on /path/to/mountdir type nfs4 (rw,relatime,...)
  • ホスト上でread-onlyマウントしていても、/var/lib/lxc/CONTAINER/fstabでのread/write権限設定によって上書きされるので注意
  • cifsも同じやりかたでマウントできる(cifsではほすとじょうでread-onlyマウントしていると、設定は引き継がれる模様)
  • ホスト上のマウントディレクトリを直接コンテナのディレクトリにbindする必要がある。つまり、以下のようなことは出来ない
    • host# mount nfsserver:/path/to/export/dir1 /mnt/somewhere/dir1
    • lxc/CONTAINER/fstab /mnt/somewhere path/to/mountdir none bind 0 0
    • lxc$ ls -l /path/to/mountdir/dir1 # 何もマウントされていないように見える

Attachments (4)

Download all attachments as: .zip