| 43 | |
| 44 | == P4M800PRO-M2 == |
| 45 | * [http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=674&CategoryID=1&MenuID=16&LanID=0 ECS P4M800PRO-M2 REV:2.0] |
| 46 | |
| 47 | === spec === |
| 48 | * Micro-ATX |
| 49 | * P4M800Pro |
| 50 | * 2 x 240-pin DDR2 DIMM socket support up to 2 GB |
| 51 | * 1 x AGP 8X slot |
| 52 | * 3 x PCI slots |
| 53 | * 1 x CNR slot |
| 54 | * Supported by VIA VT8237R+ |
| 55 | * 4 x Ultra DMA133/100/66 devices |
| 56 | * 2 x Serial ATA devices |
| 57 | * RAID0 & RAID1 configuration |
| 58 | * VT6103L 10/100 Mbps Fast Ethernet PHY |
| 59 | |
| 60 | === wattage === |
| 61 | * Intel Pentium 4 640 |
| 62 | * 512MB, DDR2, 533 x2 (see also [./memtest#P4M800ProonP4M800PRO-M2V2.0]) |
| 63 | |
| 64 | * no other device but keyboard |
| 65 | |
| 66 | 1. 1 - power off |
| 67 | 1. 66, 73, 74, 84, 85, 90 - BIOS, POST, device search |
| 68 | 1. 85 - "press a key" (No boot device) |
| 69 | 1. 88 - load syslinux from USB key |
| 70 | 1. 45 - syslinux menu |
| 71 | 1. 88, 89 - load Knoppix 5.3.1 kernel from USB key |
| 72 | 1. 87, 94, 103 - memtest |
| 73 | 1. 45 - debian installer |
| 74 | 1. 57, 68, __73, 89__, 93 - downloading debian packages from mirror site |
| 75 | |
| 76 | === CPU fan === |
| 77 | * SMART Fan Control |
| 78 | * マニュアルに説明がない |
| 79 | |
| 80 | * '''BIOSを07/20/2006から05/25/2007へ上げたところ、温度によってPWMで回転数が変わるようになった''' |
| 81 | * SMART Fan Slope PWM value という項目が新設 (default: 4 PWM value/℃) |
| 82 | |
| 83 | ==== Everflow R128015DU ==== |
| 84 | * 12V 0.50A |
| 85 | |
| 86 | * PWMに対応していない(3pin) |
| 87 | * BIOS > Hardware Monitor > SMART Fan start PWM value を 0 - 127 で変更しても回転数に変化無し |
| 88 | |
| 89 | * 4299-4326 rpm @ 26-27℃(CPU) |
| 90 | * かなりの騒音 |
| 91 | |
| 92 | ==== COOLER MASTER MGT8012ZR-W25 ==== |
| 93 | * 12V 0.54A |
| 94 | |
| 95 | * SMART Fan start PWM value |
| 96 | * BIOS -> 07/20/2006 |
| 97 | * rpmは変動するためおおよその平均値 |
| 98 | * 0 - 1260 |
| 99 | * 16 - 1253 |
| 100 | * 32 - 1240 |
| 101 | * 48 - 1312 |
| 102 | * 64 - 1910 |
| 103 | * 80 - 2610 |
| 104 | * 96 - 3300 |
| 105 | * 112 - 3930 |
| 106 | * 127 - 4450 |
| 107 | |
| 108 | == D845GRG == |
| 109 | * [http://www.intel.com/jp/support/motherboards/desktop/spec/spec2.htm マザーボード 仕様一覧 (D845EPT2, D845EBG2, D845GRG, D845GBV, D845GLAD, D845GLLY) —— インテル(R) マザーボード製品サポート] |
| 110 | * [http://www.intel.com/support/motherboards/desktop/d845grg/sb/cs-010380.htm Intel Desktop Board D845GRG — Technical product specification] |
| 111 | |
| 112 | === spec === |
| 113 | * Micro-ATX |
| 114 | * i845G |
| 115 | * 2 x 184-pin DDR DIMM socket support up to 2 GB |
| 116 | * DDR 266/200 SDRAM |
| 117 | * 1 x AGP 4X slot |
| 118 | * 3 x PCI slots |
| 119 | * ~~1 x CNR slot~~ |
| 120 | * Two IDE interfaces with UDMA 33, ATA-66/100 support |
| 121 | * Intel® 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device |
| 122 | |
| 123 | === wattage === |
| 124 | * Pen4 2.66 GHz |
| 125 | * DDR400 1GB x2 (at DDR266) (see also [./memtest#i845GonD845GRG]) |
| 126 | |
| 127 | * IDE Seagate ST340014A x2, HGST HDT725050VLA360 x1 |
| 128 | * Intel PRO/1000 MT, Intel PRO/100 S, BUFFALO IFC-PCI2SA |
| 129 | |
| 130 | * Power Supply Antec True 480 |
| 131 | |
| 132 | 1. 6 - power off |
| 133 | 1. 57 - POST |
| 134 | 1. 116, 147, 134, 124 - HDD spin up |
| 135 | 1. 110, 105, 108, 101 - device search |
| 136 | 1. 130 - booting kernel (Ubuntu hardy) |
| 137 | 1. 74 - no operation |
| 138 | |
| 139 | * 124, 129 - memtest |
| 140 | * Kernel update with Ubuntu hardy |
| 141 | 1. 85, 90 - aptitude safe-upgrade -> download packages |
| 142 | 1. 79, __97, 106__ - unpacking packages |
| 143 | 1. 114 - update-initramfs |
| 144 | |
| 145 | ==== no other device but keyboard ==== |
| 146 | 1. 4, 5 - power off |
| 147 | 1. 66, 70, 88, 85, 82, 72 - BIOS, POST, device search |
| 148 | 1. 80 - "Insert Boot Media" |
| 149 | 1. __76__, 78 - BIOS setup wizard |
| 150 | 1. 45 - syslinux menu |
| 151 | 1. 75, 78, __100__, 105 - memtest |
| 152 | 1. 44 - debian installer |