Version 1 (modified by mitty, 14 years ago) (diff) |
---|
- something wrong on SMART log
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD3000JD-22KLB0 Serial Number: WD-WMAMR1680272 Firmware Version: 08.05J08 User Capacity: 300,069,052,416 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Apr 15 19:33:49 2011 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x04) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: (9000) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. Error logging capability: (0x66) Error logging supported. No General Purpose Logging support. SCT capabilities: (0x001f) SCT Status supported. SCT Feature Control supported. SMART Attributes Data Structure revision number: 91 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 6 Read_Channel_Margin 0x1e0e 199 030 000 Old_age Always - 33117890571864 6 Read_Channel_Margin <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 0 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 102 Unknown_Attribute 0x0600 001 001 030 Old_age Offline FAILING_NOW 57381604119057 102 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 30 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 56 Unknown_Attribute 0x0000 200 145 048 Old_age Offline - 33045478403672 56 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 49 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 30 Unknown_Attribute 0x1e1e 079 030 000 Old_age Always - 15916 30 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 0 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 5 Reallocated_Sector_Ct 0x2152 094 049 000 Old_age Always - 1888062326 5 Reallocated_Sector_Ct <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 0 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 145 Unknown_Attribute 0x5b6b 117 006 000 Pre-fail Always - 33114197852193 145 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 0 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 30 Unknown_Attribute 0x1e1e 001 000 000 Old_age Always In_the_past 7710 30 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 56 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 102 Unknown_Attribute 0x0c00 200 102 030 Old_age Offline - 36636071034880 102 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 30 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 49 Unknown_Attribute 0x3430 063 000 000 Old_age Offline In_the_past 0 49 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 0 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA 6 Read_Channel_Margin 0x1e0e 030 030 000 Old_age Always - 33114703142430 6 Read_Channel_Margin <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO 0 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA SMART Error Log Version: 1 ATA Error Count: 7710 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7710 occurred at disk power-on lifetime: 12833 hours (534 days + 17 hours) When the command that caused the error occurred, the device was sleeping. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 3f 00 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 1e 00 00 00 00 66 00 00 15d+22:14:23.494 RECALIBRATE [RET-4] 00 00 91 5b 00 06 0e 00 5d+20:21:30.270 NOP [Abort queued commands] 10 21 31 34 3f 00 00 52 00:00:00.000 RECALIBRATE [OBS-4] 1e 1e 00 00 00 00 00 1e 01:51:24.684 RECALIBRATE [RET-4] 00 00 38 00 01 91 6b 00 5d+20:21:30.270 NOP [Abort queued commands] Error 7709 occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) When the command that caused the error occurred, the device was in a vendor specific state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 06 00 05 21 32 31 30 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 0e 1e 1e 1e 1e 1e 1e 1e 00:00:00.000 [RESERVED] 00 00 00 00 00 00 00 00 01:39:51.313 NOP [Abort queued commands] 00 66 0c 66 00 06 10 00 12d+06:33:04.817 NOP [Reserved subcommand] 6b 06 1e 1e 1e 1e 1e 00 00:00:00.000 [RESERVED] 30 00 00 00 00 00 00 3f 04:39:37.272 WRITE SECTOR(S) Error 7708 occurred at disk power-on lifetime: 7710 hours (321 days + 6 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 00 66 00 0c 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 91 5b 00 06 0e 00 5d+20:21:30.270 NOP [Abort queued commands] 10 21 31 34 3f 00 00 52 00:00:00.000 RECALIBRATE [OBS-4] 1e 1e 00 00 00 00 00 1e 01:51:24.684 RECALIBRATE [RET-4] 00 00 38 00 01 91 6b 00 5d+20:21:30.270 NOP [Abort queued commands] 00 06 05 21 32 31 30 00 00:00:00.000 NOP [Reserved subcommand] Error 7707 occurred at disk power-on lifetime: 3590 hours (149 days + 14 hours) When the command that caused the error occurred, the device was in a vendor specific state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 1e 1e 1e 1e 1e 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 00 00 00 00 00 00 01:39:51.313 NOP [Abort queued commands] 00 66 0c 66 00 06 10 00 12d+06:33:04.817 NOP [Reserved subcommand] 6b 06 1e 1e 1e 1e 1e 00 00:00:00.000 [RESERVED] 30 00 00 00 00 00 00 3f 04:39:37.272 WRITE SECTOR(S) 00 00 00 66 00 0c 00 00 9d+17:37:24.485 NOP [Abort queued commands] Error 7706 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 91 01 5b 06 0e 1e 1e Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 10 21 31 34 3f 00 00 52 00:00:00.000 RECALIBRATE [OBS-4] 1e 1e 00 00 00 00 00 1e 01:51:24.684 RECALIBRATE [RET-4] 00 00 38 00 01 91 6b 00 5d+20:21:30.270 NOP [Abort queued commands] 00 06 05 21 32 31 30 00 00:00:00.000 NOP [Reserved subcommand] 1e 1e 1e 1e 1e 00 00 1e 01:51:24.672 RECALIBRATE [RET-4] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 90% 15916 - # 2 Offline Completed without error 00% 0 - # 3 Reserved offline Aborted by host 140% 0 - # 4 Offline Completed without error 00% 0 - # 5 Offline Completed without error 00% 0 - # 6 Offline Completed without error 00% 102 - # 7 Reserved offline Completed without error 00% 256 - # 8 Reserved offline Completed without error 00% 102 - # 9 Reserved offline Completed: servo/seek failure 110% 91 16777272 #10 Reserved offline Aborted by host 00% 20997 - #11 Reserved offline Completed without error 140% 7710 - #12 Reserved offline Fatal or unknown error 20% 12337 1376063494 #13 Reserved offline Aborted by host 140% 7710 - #14 Reserved offline Fatal or unknown error 150% 0 808530465 #15 Reserved offline Aborted by host 140% 7710 - #16 Offline Completed without error 00% 0 - #17 Offline Completed without error 00% 0 - #18 Offline Completed without error 00% 0 - #19 Offline Completed without error 00% 56 - Device does not support Selective Self Tests/Logging