smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Fujitsu MHV series Device Model: FUJITSU MHV2100AH Serial Number: - Firmware Version: 000000A0 User Capacity: 100,030,242,816 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue May 22 10:20:59 2012 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 544) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 69) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 118381 2 Throughput_Performance 0x0004 100 100 000 Old_age Offline - 27721728 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 368 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 1 (1999, 1) 7 Seek_Error_Rate 0x000e 100 100 000 Old_age Always - 786 8 Seek_Time_Performance 0x0004 100 100 000 Old_age Offline - 0 9 Power_On_Seconds 0x0032 095 095 000 Old_age Always - 2889h+07m+53s 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 323 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 19395 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 26 (Lifetime Min/Max 8/57) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 81838 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1 (1, 6966) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000e 100 100 000 Old_age Always - 17906 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 3728140666352 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 2855 - # 2 Short offline Completed without error 00% 2 - # 3 Short captive Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.