1 | smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) |
---|
2 | Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: TOSHIBA MK1214GAP |
---|
6 | Serial Number: - |
---|
7 | Firmware Version: N0.12 F |
---|
8 | User Capacity: 12,072,517,632 bytes |
---|
9 | Device is: Not in smartctl database [for details use: -P showall] |
---|
10 | ATA Version is: 4 |
---|
11 | ATA Standard is: Exact ATA specification draft version not indicated |
---|
12 | Local Time is: Tue May 22 10:30:34 2012 JST |
---|
13 | SMART support is: Available - device has SMART capability. |
---|
14 | SMART support is: Enabled |
---|
15 | |
---|
16 | === START OF READ SMART DATA SECTION === |
---|
17 | SMART overall-health self-assessment test result: PASSED |
---|
18 | See vendor-specific Attribute list for marginal Attributes. |
---|
19 | |
---|
20 | General SMART Values: |
---|
21 | Offline data collection status: (0x00) Offline data collection activity |
---|
22 | was never started. |
---|
23 | Auto Offline Data Collection: Disabled. |
---|
24 | Total time to complete Offline |
---|
25 | data collection: ( 245) seconds. |
---|
26 | Offline data collection |
---|
27 | capabilities: (0x05) SMART execute Offline immediate. |
---|
28 | No Auto Offline data collection support. |
---|
29 | Abort Offline collection upon new |
---|
30 | command. |
---|
31 | No Offline surface scan supported. |
---|
32 | No Self-test supported. |
---|
33 | No Conveyance Self-test supported. |
---|
34 | No Selective Self-test supported. |
---|
35 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
36 | power-saving mode. |
---|
37 | Supports SMART auto save timer. |
---|
38 | Error logging capability: (0x00) Error logging NOT supported. |
---|
39 | No General Purpose Logging support. |
---|
40 | |
---|
41 | SMART Attributes Data Structure revision number: 5 |
---|
42 | Vendor Specific SMART Attributes with Thresholds: |
---|
43 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
---|
44 | 1 Raw_Read_Error_Rate 0x000b 253 100 050 Pre-fail Always - 0 |
---|
45 | 2 Throughput_Performance 0x0004 100 100 050 Old_age Offline - 0 |
---|
46 | 3 Spin_Up_Time 0x0026 100 100 001 Old_age Always - 2183 |
---|
47 | 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5896 |
---|
48 | 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 |
---|
49 | 8 Seek_Time_Performance 0x0004 100 100 050 Old_age Offline - 0 |
---|
50 | 9 Power_On_Hours 0x0032 089 089 050 Old_age Always - 4678 |
---|
51 | 10 Spin_Retry_Count 0x0033 215 100 030 Pre-fail Always - 0 |
---|
52 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5805 |
---|
53 | 220 Disk_Shift 0x0002 100 100 001 Old_age Always - 4133 |
---|
54 | 222 Loaded_Hours 0x0032 096 096 050 Old_age Always - 1661 |
---|
55 | 223 Load_Retry_Count 0x0032 100 100 050 Old_age Always - 0 |
---|
56 | 224 Load_Friction 0x0022 100 100 050 Old_age Always - 0 |
---|
57 | 225 Load_Cycle_Count 0x0032 065 065 070 Old_age Always FAILING_NOW 352556 |
---|
58 | 226 Load-in_Time 0x0026 100 100 001 Old_age Always - 449 |
---|
59 | 228 Power-off_Retract_Count 0x0032 100 100 060 Old_age Always - 202 |
---|
60 | |
---|
61 | Warning: device does not support Error Logging |
---|
62 | Error SMART Error Log Read failed: Input/output error |
---|
63 | Smartctl: SMART Error Log Read Failed |
---|
64 | Warning: device does not support Self Test Logging |
---|
65 | Error SMART Error Self-Test Log Read failed: Input/output error |
---|
66 | Smartctl: SMART Self Test Log Read Failed |
---|
67 | Device does not support Selective Self Tests/Logging |
---|